Fabrication of high aspect ratio and open‐ended TiO2 nanotube photocatalytic arrays through electrochemical anodization

Well‐aligned, high aspect‐ratio and open‐ended TiO₂ nanotube arrays secured within a Ti foil (TiO₂ nanotubes cartridge) were successfully prepared through the double‐sided anodization method. With ～210 µm of nanotube length, the anodic growth of TiO₂ was accelerated and stabilized by the lactic acid‐containing ethylene glycol electrolyte. In the absence of lactic acid, the anodization led to detachment of nanotubes from the Ti foil after 5–6 h of high voltage (80 V) anodization. Transmission electron microscope image and Raman spectrum revealed that the as‐anodized TiO₂ nanotube arrays without annealing treatment were partially crystalline anatase and demonstrated photocatalytic activity in the mineralization of formic acid. © 2015 American Institute of Chemical Engineers AIChE J, 62: 415–420, 2016     

Effects of porosity,dry unit weight,cement content and void/cement ratio on unconfined compressive strength of roof tile waste-silty soil mixtures

One of the conventional ways to improve the mechanical behavior of soils is to mix them with cementing agents such as cement, lime and fly ash. Recently, introduction to alternative materials or sub-products that can be adopted to improve the soil strength is of paramount importance. Therefore, the present study aims to investigate the effects of porosity (η), dry unit weight (γ_d) of molding, cement content (C) and porosity/volumetric cement content ratio (η/C_iv) or void/cement ratio on the unconfined compressive strength (q_u or UCS) of silty soil–roof tile waste (RT) mixtures. Soil samples are molded into four different dry unit weights (i.e. 13 kN/m³, 13.67 kN/m³, 14.33 kN/m³ and 15 kN/m³) using 3%, 6% and 9% cement and 5%, 15% and 30% RT. The results show that with the addition of cement, the strength of the RT–soil mixtures increases in a linear manner. On the other hand, the addition of RT decreases q_u of the samples at a constant percentage of cement, and the decrease in porosity can increase q_u. A dosage equation is derived from the experimental data using the porosity/volumetric cement content ratio (η/C_iv) where the control variables are the moisture content, crushed tile content, cement content and porosity.     

Interconnectivity and permeability of supercritical fluid-foamed scaffolds and the effect of their structural properties on cell distribution

This study aims to investigate interconnectivity and permeability of scCO₂-foamed scaffolds and the influence of structural scaffold properties on cell distribution. Supercritical fluid technology was utilized to fabricated scaffolds from 37 kDa, 53 kDa and 109 kDa PLGA (85:15). Pore size, pore size distribution and porosity were quantified by MicroCT, and window sizes were measured using SEM. A novel interconnectivity algorithm allowed the quantification of scaffold interconnectivity in three space dimensions. To determine the permeability of porous materials direct perfusion experiments were performed, where a known flow rate was applied to measure the pressure differential across the scaffolds. The permeability was calculated using Darcy's law. Largest pore sizes, porosities, interconnectivities and permeabilities were obtained for scaffolds fabricated from 37 kDa PLGA. These scaffolds showed a heterogeneous pore structure and distribution, whereas homogeneous pore structure, smallest pore sizes, porosities, interconnectivities and permeabilities were observed for scaffolds fabricated from 109 kDa PLGA. The distribution of 3T3 fibroblasts through scCO₂-foamed scaffolds was investigated by MicroCT and MTT staining. Cells were further visualized by fluorescent imaging. Uniform cell distribution was observed on scaffolds fabricated from 109 kDa PLGA and an average of 10% of the total scaffold volume was covered with cells that had adhered onto them.     

Enzymatic transesterification for production of biodiesel using yeast lipases: An overview

Biodiesel has provided an eco-friendly solution to fuel crisis, as it is renewable, biodegradable and a non-toxic fuel that can be easily produced through enzymatic transesterification of vegetable oils and animal fats. Enzymatic production of biodiesel has many advantages over the conventional methods as high yields can be obtained at low reaction temperatures with easy recovery of glycerol. Microbial lipases are powerful biocatalysts for industrial applications including biodiesel production at lower costs due to its potential in hydrolyzing waste industrial materials. Among them, lipases from yeasts, Candida antarctica, Candida rugosa, Cryptococcus sp., Trichosporon asahii and Yarrowia lipolytica are known to catalyze such reactions. Moreover, stepwise addition of methanol in a three step, two step and single step reactions have been developed using yeast lipases to minimize the inhibitory effects of methanol. The latest trend in biodiesel production is the use of whole-cell as biocatalysts, since the process requires no downstream processing of the enzyme. Synthesis of value added products from the byproduct glycerol further reduces the production cost of biodiesel. This review aims at compiling the information on various yeast lipase catalyzed transesterification reactions for greener production of biodiesel.     

Ice detection and classification on an aircraft wing with ultrasonic shear horizontal guided waves

Ice accumulation on airfoils has been identified as a primary cause of many accidents in commercial and military aircraft. To improve aviation safety as well as reduce cost and environmental threats related to aircraft icing, sensitive, reliable, and aerodynamically compatible ice detection techniques are in great demand. Ultrasonic guided-wave-based techniques have been proved reliable for "go" and "no go" types of ice detection in some systems including the HALO system, in which the second author of this paper is a primary contributor. In this paper, we propose a new model that takes the ice layer into guided-wave modeling. Using this model, the thickness and type of ice formation can be determined from guided-wave signals. Five experimental schemes are also proposed in this paper based on some unique features identified from the guided- wave dispersion curves. A sample experiment is also presented in this paper, where a 1 mm thick glaze ice on a 2 mm aluminum plate is clearly detected. Quantitative match of the experiment data to theoretical prediction serves as a strong support for future implementation of other testing schemes proposed in this paper.     

A cubic ordered, mesoporous carbide-derived carbon for gas and energy storage applications

A hierarchical and highly porous carbide-derived carbon (CDC) was obtained by nanocasting of pre-ceramic precursors into cubic ordered silica (KIT-6) and subsequent chlorination. Resulting CDC replica materials show high methane and n-butane uptake and excellent performance as electrode materials in supercapacitors.     

Testing a mathematical model for initial chemical reaction fouling using a dilute protein solution

A 1 wt% lysozyme solution was used as a model fluid to test a previously formulated mathematical model for the initial chemical reaction fouling rate of a heat transfer surface. The experimental results showed that, at a given wall temperature, a maximum initial fouling rate existed over a range of fluid velocities. The maximum rate and the fluid velocity at which it occurred both increased as the wall temperature increased. These observations were consistent with the model. Quantitatively, the average absolute percent deviation between the experimental results and the optimum model predictions was 23,3%. The decrease in initial fouling rate with increasing velocity at high fluid velocities was even greater than predicted by the model.